halloween cards

NND August Release Day 4 – Harvest Haul + Newton’s Crate + Giveaway

| marialrussell

I am a bit bummed because it’s the last day of the August reveals by Newton’s Nook Designs! Were you able to hop along with us for the first three days? Which one is your favorite so far? Remember that you have a chance to win the stamp set being revealed each day so please read through til the end of the blog post to find out more info.  [Just a little important note:  I know some of you had difficulties finding the comments section.  If you would like to leave a comment to participate in the giveaway, the “comments section” will only be ever visible when a single post on Word Press is being viewed. Please click on this particular blog post and you will be able to leave a comment below.  Thank you!]  

For the final day of the reveals, we are showcasing the Harvest Haul Stamp Set + coordinating dies along with the Newton’s Crate Stamp Set + coordinating dies.

For my first project, I started by masking some Bristol smooth white card stock with masking tape and ink-blending this panel using the Sunscape Stencil and some distress oxide inks. I cut this panel and adhered on some Neenah solar white card stock with liquid glue.

I added some texture to the foreground by using some embossing folder and partially embossed the same on the die-cutting machine, then adhering it to a top folding notecard.

I finished the card design by stamping the sentiment on the banner that was die-cut from the Frames & Flags Die Set and heat-set with the heating tool. Here’s another look:

The next project is so cute and I love how this turned out. I started by temporarily taping the Jack-O-Lantern stencil no. 1 on some Neenah solar white panel. I used some orange ink and a blending brush to add the pumpkins.

I did the same to add the pumpkin stems detail by taping Jack-O-Lantern stencil no. 2 to the panel and used some lime green dye ink with another blending brush. I removed the stencil and cut this panel and adhered on some pattern paper from the Autumn Paper Pad with liquid glue.

I needed to ground the pumpkin images from the pattern paper so I adhered two orange strips on both sides, and added the scallop vellum that was die-cut using the Oval Frames Die. The vellum somehow toned down the busy patterns of the background, don’t you think?!

I stamped the images on some Neenah solar white card stock and die-cut using the coordinating die. I colored the images with some alcohol markers and foam-mounted to the card-front for added dimension. I stamped the sentiment on the image with some black ink.

Lastly, I added the orange bow to the card to finish my design. In case you’re wondering, the bow is from the Baby Bib Die Set. Here’s another look at the card:

Would you like to win the “Harvest Haul” or the “Newton’s Crate” Stamp Set? We will choose ONE lucky winner for each stamp set!

Here’s how to win: Comment on the NND blog and Design Team blogs (see list below)! The winner will be chosen at random from the collective reveal posts. Make sure to check out each of their blogs and comment for your chance to win. You will not know which blog has been chosen so the more you comment on, the better your chances are of winning!  You have until Thursday August 18th at 9pm ET to comment  — winners will be announced on the blog post on Friday, August 19th. 

Check out all the awesome Design Team Blogs below to enter:

Newton’s Nook Designs

Donna Idlet

Ellen Haxelmans

Tina Herbeck

Larissa Heskett

Samantha Mann

Zsofia Molnar

Maria Russell (you are here)

Farhana Sarker

Tatiana Trafimovich

Amanda Wilcox

———-SUPPLIES———

NND August Release Day 3 – Autumn Oval + Autumn Paper Pad + Giveaway

| marialrussell

It’s Day 3 of the August release by Newton’s Nook Designs! Are you enjoying the reveals so far? Remember that you have a chance to win the stamp set being revealed each day so please read through til the end of the blog post to find out more info.  [Just a little important note:  I know some of you had difficulties finding the comments section.  If you would like to leave a comment to participate in the giveaway, the “comments section” will only be ever visible when a single post on Word Press is being viewed. Please click on this particular blog post and you will be able to leave a comment below.  Thank you!]  

For Day 3, we are showcasing the Autumn Oval Stamp Set that coordinates perfectly with the previously-released Oval Frames Die Set with the BEAUTIFUL Autumn Paper Pad.

The background was created by die-cutting the Autumn Paper with a rectangle die from my collection. I adhered this panel on some A2-size, top-folding notecard.

The focal image was stamped on some Neenah solar white card stock and die-cut using the Oval Frames Die Set. I fussy-cut around the images using precision snips for added texture and interest.

Alcohol markers were used to color the pumpkins, leaves and berries, including the detailed oval on the side to ground the images [Designer tip: this somehow made the images pop against the yellow background].

I finished the card design by adding the sentiment that was heat-set with heating tool and die-cut using the smallest die from the Oval Frames Die Set.

Would you like to win the “Autumn Oval” Stamp Set? This stamp set will be given away to ONE lucky winner!

Here’s how to win: Comment on the NND blog and Design Team blogs (see list below)! The winner will be chosen at random from the collective reveal posts. Make sure to check out each of their blogs and comment for your chance to win. You will not know which blog has been chosen so the more you comment on, the better your chances are of winning!  You have until Thursday August 18th at 9pm ET to comment  — winners will be announced on the blog post on Friday, August 19th. 

Check out all the awesome Design Team Blogs below to enter:

Newton’s Nook Designs

Donna Idlet

Ellen Haxelmans

Tina Herbeck

Larissa Heskett

Samantha Mann

Zsofia Molnar

Maria Russell (you are here)

Farhana Sarker

Tatiana Trafimovich

Amanda Wilcox

———-SUPPLIES———

NND August Release Day 2 – Halloween Pile + Spiderweb Oval + Giveaway

| marialrussell

It’s Day 2 of the August reveals by Newton’s Nook Designs! I hope you were able to check out yesterday’s reveal as well. You have a chance to win the stamp set being revealed each day so please read through til the end of the blog post to find out more info.  [Just a little important note:  I know some of you had difficulties finding the comments section.  If you would like to leave a comment to participate in the giveaway, the “comments section” will only be ever visible when a single post on Word Press is being viewed. Please click on this particular blog post and you will be able to leave a comment below.  Thank you!]  

For Day 2 of the reveals, we are showcasing the Halloween Pile Stamp Set + coordinating dies along with the Spiderweb Oval Stamp Set that goes along with the previously released Oval Frames Die Set.

For my first project, I started by die-cutting the pattern paper from the Halloween Meows Paper Pad and adhered the same on some A2-size, top-folding notecard. I stamped the images on some Neenah solar white card stock and colored them in with alcohol markers. I used the coordinating die to cut the image out.

The background was made by by doing the following steps –> (1) cover some Bristol smooth white card stock with some circle masking paper; (2) ink-blend this panel with some distress oxide ink; (3) use some distress sprayer to spray some water and pick up the excess with some paper towel; (4) remove the masking paper and use the same foam-blending tool to add some interest and texture to the moon; (5) remove the masking paper and adhere the ink-blended background to the card with foam-adhesive for more dimension.

Die-cut the grass panel using the Land Border Die on some black card stock and adhere to the foreground with liquid glue. Adhere the focal image on the card. Stamp the bats with some black ink.

Finish the card design by stamping the sentiment on the grass with Versamark ink. Sprinkle some white embossing powder and heat-set with the heating tool. Here’s another look:

The next project is really simple but I LOVE how it turned out! I die-cut the pattern paper from the Halloween Meows Paper Pad and adhered the same on some A2-size, top-folding notecard with liquid glue.

The focal image was stamped on some black card stock with Versamark ink. I sprinkled some white embossing powder on this and heat-set with the heating tool. I die-cut the focal image using the Oval Frame Die and used my precision snips to fussy-cut around the images. I foam-mounted this to the card for added dimension.

I finished the card design by foam-mounting the sentiment that I stamped and heat-set with heating tool and die-cut using the smallest oval die from the Oval Frames Die Set. Here’s another quick look:

Would you like to win the “Halloween Pile” or the “Spiderweb Oval” Stamp Set? We will choose ONE lucky winner for each stamp set!

Here’s how to win: Comment on the NND blog and Design Team blogs (see list below)! The winner will be chosen at random from the collective reveal posts. Make sure to check out each of their blogs and comment for your chance to win. You will not know which blog has been chosen so the more you comment on, the better your chances are of winning!  You have until Thursday August 18th at 9pm ET to comment  — winners will be announced on the blog post on Friday, August 19th. 

Check out all the awesome Design Team Blogs below to enter:

Newton’s Nook Designs

Donna Idlet

Ellen Haxelmans

Tina Herbeck

Larissa Heskett

Samantha Mann

Zsofia Molnar

Maria Russell (you are here)

Farhana Sarker

Tatiana Trafimovich

Amanda Wilcox

———-SUPPLIES———

Cutest Pup-Kin in the Patch with LDRS Creative

| marialrussell

Hello my crafty friends!  I am so happy to be on the LDRS Creative Inspiration Blog!  I’m back today sharing yet another cute but “spooky” card, showcasing the Trick or Treat Stamp Set and coordinating dies, along with (this is one of my all-time favorite paper pack) the Trick or Treat 6×6 Paper Pack, A2 Stitched Layered Card Toppers, In the Doghouse Border Die, and the Country Fence – Pocket Die. 

Here’s what you need to create this card:

Now that we have all of the components, we are ready to assemble the card.  

  • Adhere the pattern paper on an A2-size black note card.
  • Foam-mount the In the Doghouse Border die-cut for added dimension.
  • Adhere the colored images on the foreground with liquid glue.
  • Add the Picket Fence on both sides of the card with foam adhesive.  Make sure you are using enough foam adhesive for added stability.
  • Adhere the banner on the doghouses with liquid glue.
  • Use tape runner to adhere the sentiment.
  • Finish the design by adding some glittered star stickers.

Here’s another look at this cute Halloween card!  Don’t you just LOVE these puppies?! 

 I just love mixing and matching products from LDRS Creative to create some cute scenes! The supplies I used are listed and linked below.  Thanks for stopping by and have an amazing day!

————SUPPLIES———- 

Newton’s Nook Designs Halloween Inspiration Week

| marialrussell

Hello and welcome back! I hope everyone’s doing well today! As we bid summer farewell, what could be more fitting than to start your week and get excited for Halloween!

This week, Newton’s Nook Designs is getting ready for Halloween with a fun Inspiration week! All week long, the NND Design Team will be sharing inspiration using some of our favorite Halloween products to get you in the mood for tricks and treats! Check out what I created today and don’t forget to check the NND Blog each day this week for more fun inspiration!

Last week, I shared this cute “Candy Corn” Halloween tag on my blog and my friend liked it so much that I had to re-create it this week. I am featuring the Fancy Edges Tag Die Set with the Trick or Treat Kittens stamp set and coordinating dies.

Before I start with the tag, I wanted to create this cute Witch’s Broom Pen to go with the treat! If you look closer, you will see the red glowing eyes that gives it a spooky effect! I thought this is really cute and will be a nice addition to the treat.

I cut a strip of baking paper. I used my specialty scissors to create the fringe and wrapped it around the bottom of the pen. I adhered the fringe with hot glue so it wouldn’t come off. I added a black bow at the bottom to finish the look. This pen can actually stand up on it’s own!

Next, I filled a small bag with some of my friend’s favorite candy bars and closed the top with some black curling ribbons. Last thing to do is to add a tag!

Step-by-Step Instructions for the Tag:

  • Stamp the image using the Trick or Treat Kitten Stamp set on Bristol smooth white card stock and color the images in with Zig Clean Color real Brush Markers.
  • Use coordinating die to die-cut the image.
  • Create the Candy Corn Tag by die-cutting white, orange, yellow and black card stock using the Fancy Edges Tag Die Set. Adhere all pieces together with liquid glue.
  • Stamp the sentiment on the tag with Black Onyx ink.
  • Adhere the image on the tag with foam adhesive for added dimension.
  • Attach the tag to the treat bag with some baker’s twine.

My friend and I love Halloween so much! Not only will she love the treats inside this treat bag but I’m sure she is also going to love the Witch’s Broom Pen. It can stand up and the eyes glow in the dark! Check out the photo below!

I hope you like my project today and got inspired! The supplies I used are listed and linked below. Don’t forget to visit the Halloween Products Category at Newton’s Nook Designs and get your favorites for creating some cute and spooky Halloween crafts!

——-SUPPLIES——

It’s All About Candy Corn with Newton’s Nook Designs

| marialrussell

Hello and welcome back! I am so glad you joined me today!

Today is all about Candy Corns! As soon as I saw this stencil set from the August release, this card idea already popped in my head. Isn’t is strange that you sometimes get ideas right away?! Most of the times, I have to look at my previous card designs to get some inspiration (or if I’m feeling more adventurous, I’d look at Pinterest).

For my project, I am showcasing the Candy Corn 6×6 Stencil Set, along with the Candy Corn Stamp Set and Dies with the Fancy Edges Tag Die Set.

Step by Step Instruction:

  • Use Pixie Spray to temporarily adhere Candy Corn Stencil # 1 on some Neenah Solar White card stock.
  • Use some detailed blending brushes with Mustard Seed Distress Oxide Ink and blend until you get a nice vibrant color. Let this dry for a few minutes.
  • Repeat process and use Candy Corn Stencil #2 using Carved Pumpkin Distress Oxide Ink.
  • Repeat the process above but this time, use Deco Foil Transfer Gel Blanco to make it stand out. Smooth the gel out by using the Stencil Pal. Let this dry for about half an hour.
  • Stamp images on some Neenah solar white card stock and color the images in with alcohol markers.
  • Die-cut the images with Candy Corn coordinating die.
  • Cut some vellum measuring 2 1/2 by 5 1/2 and adhere to the card background with tape runner. Designer note: make sure you hide the adhesive so that it doesn’t show up.
  • Adhere this background on an A2-size notecard.
  • Die-cut some white, yellow, orange and black card stock using the Fancy Edges Tag Die Set (a must-have for any paper crafter since there are so many possibilities using this set). Adhere with liquid glue.
  • Use some black and white Baker’s Twine and add to the tag.
  • Add some foam-tape to the back of the tag and adhere on the card.
  • Adhere the Candy Corn images with liquid glue.
  • Finish the design by stamping the sentiment using yellow, orange and black ink.

It always puts me in a great mood when I see bags of candy corn at the grocery store. It just reminds me of all the great holidays coming up, especially HALLOWEEN (my favorite holiday)!

I hope you enjoyed this inspiration today. The supplies I used are listed and linked below. Thank you again for joining me, and happy crafting!

——–SUPPLIES———

Too Cute to Spook with LDRS Creative

| marialrussell

Hello LDRS fans!  I’m back today with two VERY SIMPLE (but so ADORABLE) cards, showcasing the Trick or Treat 6×8 Pirouette Stamp Set along with the newest “must-have” stamping template called Pirouette Pattern Templates with some of the greatest hybrid inks –> Raven, Alloy, Grape Ape and In Your Face Orange.

This first card reminds me of one of my all-time favorite animated movie for Halloween.  Can you guess what movie that is?  Of course that was my inspiration creating this card. 

I started by positioning the Pirouette Pattern Master Template inside my stamping tool and taped it down with washi tape.  I position the spider web from the Trick or Treat 6×8 Pirouette Stamp Set in the center and closed the lid. I opened the lid again to place my card stock inside the stamping tool and stamped the spider web in the middle using Alloy Hybrid Ink.  I went on and positioned the stars and dots wreath and used Grape Ape Hybrid Ink.    

I repeated the process by stamping the images randomly on my card stock.  Next, I used some Raven Hybrid Ink to stamp the skull in the middle of the spider web.   I adhered this card panel on an A2 size notecard. and finished the card design by stamping the black ribbon and the sentiment with Raven Hybrid ink.  I just LOVE the intensity of this black ink, don’t you?! 

For my next project below, I used the Pirouette Patterns Template again to stamp the images on a 4×4 card stock.  This template makes it super easy to perfectly center your images on the card.  The lines really helped me position the images to create a seamless pattern.  I am warning you, it gets really addicting! Haha!

I started with a 4×4 card stock and stamped the spiderweb first with Alloy Hybrid Ink.  Next, I stamped the stars and dots wreath image using Grape Ape Hybrid Ink.  I positioned the ghost and stamped it with Raven Hybrid ink.  I colored the ghost with some alcohol markers for added dimension.  Then, I moved on by stamping the rest of the images with Raven and In Your Face Orange Hybrid inks.

Next thing to do is to mat the card on some orange and black card stock, then adhering it on some purple card stock measuring 4 3/4 by 9 1/2 folded in half, which makes it a 4 3/4 x 4 3/4 notecard.  I finished my card design by stamping the words “Happy Hunting” with some Raven Hybrid Ink.  Here’s another look: 

I just LOVE using the Trick or Treat 6×8 Pirouette Stamp Set with the Pirouette Pattern Templates!  You can create endless design possibilities using both products!  For more project inspiration, please head on over to the LDRS Creative Blog or the LDRS Creative YouTube channel.    The supplies I used are listed and linked below.  Thanks for stopping by today and happy stamping! 

———-SUPPLIES———-

Cheers, Witches! With Newton’s Nook Designs

| marialrussell

Hello Newton’s Nook fans! I am so glad you joined me today and I am also up on the Newton’s Nook blog, sharing this cute Halloween card from the new August product release. I didn’t get to join in the fun because I was traveling but rest assured that you will be seeing a lot more throughout the month.

It is so much fun to mix and match a couple of stamp sets and for today’s project, I am showcasing the Brooms & Boos stamp set and dies, Count Newton stamp set and dies, along with the Spooky Street Stamp set.

Step-by Step Instructions:

  • Stamp images on Neenah solar white card stock with alcohol-friendly ink and color the images in with alcohol markers.
  • Die-cut colored images using coordinating dies.
  • Die cut some extra elements on black card stock to create the spooky scene, using the land borders die set and extra tombstone from the Count Newton die set.
  • Apply some Unicorn ink on the edges of the tombstone, land and grass borders for added texture.
  • Use a circle die to die-cut some masking paper and adhere to an A2-size panel of Bristol smooth white card stock.
  • Ink-blend this panel with distress oxide ink.
  • Use distress sprayer to add water droplets to the ink-blended panel for added texture and interest.
  • Pick up excess water with some paper towel and remove the mask.
  • Stamp the spooky tree, bats and sentiment using black ink.
  • Adhere the hill and grass border on the card using tape runner.
  • Use white gel pen to add some detail to the black tombstone.
  • Adhere the rest of the elements to finish the scene.

I really LOVE creating halloween cards and this will be the first of many halloween cards I’ll be posting on this blog. Here’s a closer look:

The white pigment ink on the tombstone, hill and grass border added more texture and interest to this spooky scene, don’t you think?

That is all for today! I hope this spooky card will entice you to start thinking about Halloween! The supplies are listed and linked below for your reference*. Thanks so much for stopping by today, and happy crafting!

Love,

——–supplies——

DISCLOSURE. *I belong to a few design teams with affiliate programs and link these supplies at the end of each blog post. If you click on my affiliate link, I will receive a small commission at no additional cost to you. I use these funds to pay for the cost of running this blog. If you like what I do, please consider supporting me by clicking on these links. Thank you so much!

Kat Scrappiness September Product Release – HALLOWEEN +GIVEAWAY Info

| marialrussell
September Release Day One

Hello and welcome to the Kat Scrappiness September Product Release – Halloween!   

I’m so excited to share this post today as we kick off this week with the most adorable Halloween-themed products! There are are a lot of products to showcase so sit back, relax and enjoy browsing through all of them today!

Kat Scrappiness also has a GIVEAWAY so make sure you read all the way to the end of this post and click on the link to participate there directly and have a chance to WIN the entire release!!

DRESS-UP QUOKKA STAMP SET & COORDINATING DIES:

Starting with the Dress Up Quokka Stamps (and dies).  You can use these cute little quokkas alone, or with any of our coordinating products- i.e., Dress Up Quokka Halloween Costumes Add On Stamp Set, Thanksgiving Costumes Add On Stamp Set and Christmas Costumes Add On Stamp Set (being released tomorrow!).

DRESS-UP QUOKKA HALLOWEEN ADD-ON  STAMP SET

Coordinating dies coming soon (mid Sept) although you can purchase the SVG cut files at the shop now.

HOME SWEET HOME BASE DIE

Our Home Sweet Home Base Die will create the base house perfect for any season.  It measures approximately 4.25 x 5.75 inches.  You can use it to create a house shaped card ,create a larger card such as a 5×7, an-A2 card (cutting it off slightly to make the house smaller!).  There are multiple ways to use this die to create a one-of-a-kind house of your own!

Home Sweet Home Base Die

HOME SWEET HOME – HAUNTED HOUSE HALLOWEEN ADD-ON DIE SET

The Haunted House dies are an add-on die set made to go with our Home Sweet Home Die Set.   This die set will turn your home sweet home house into a spooky haunted house for Halloween!  (This die set will not work alone, you need the Home Sweet Home Dies to create your very own  haunted house).

Haunted House Add On Dies

CRAFTER’S ESSENTIALS – HALLOWEEN DIE SET

The Crafters Essentials Halloween Dies include 8 individually designed dies that you can mix and match to create uniquely designed cards time and time again.  These dies will work for A2, Slimline & Mini Slimline Cards (and other projects too!)

Crafters Essentials Halloween Dies

BOO-GY GHOSTS DIE SET

This super adorable Boo-gy Ghosts die set consists of 9 dies including five ghosts and four cute little accessories that will allow you to create each ghost’s individual character!

Boo-gy Ghost Dies

CREEPY CRAWLY DIE SET

Create your own Creepy Crawly fun with this die set which includes four dies, two spider webs and two CUTE spiders!  Add some googly eyes to the spiders for that extra cutesy look!  Wouldn’t it be fun to add these die-cuts to your Happy Planner as well?

creepy crawly dies

LIFT YOUR SPIRITS WORD DIE WITH SHADOW

This sentiment die has a 1/4″ shadow.  You can use the sentiment with or without the shadow.  This die set can be used for any occasion and they’re also perfectly matched to go with the Boo-gy Ghosts!

HAPPY HALLOWEEN WORD DIE WITH SHADOW

This sentiment die has a 1/4″ shadow.  You can use the sentiment with or without the shadow.

Happy Halloween Die

BOO TO YOU SLIMLINE PAPER PACK

This BOO TO YOU! Patterned Paper Pack is a fun, colorful and spooky selection of papers in a Halloween theme.  They will make your Halloween cards a blast to create!


MINI SLIMLINE ENVELOPE DIE SET – HAPPY MAIL

Create your own Mini Slimline Envelopes using this set of 14 dies.  Use your own creativity to select from either patterned paper or colored card stock, etc. to create your own one-of-a-kind envelope. We’ve added the “Happy Mail” word dies to decorate your envelope.  The envelope can be mailed and/or hand delivered to the recipient.

Happy Mail Mini Slimline Envelope Die

I have four (4) samples to share with you today. I have mixed and matched the Halloween products to create some fun and spooky cards.

I have to admit that this first card below is probably one of my favorite Halloween cards that I’ve ever made!   I ink-blended the background with some distress oxide inks and used a stencil set from my collection to create the creepy sky!

The Home Sweet Home House Die Set  was die-cut using some purple card stock and dry-embossed with a brick stencil. I then added black soot on the bricks to add more texture and dimension.

I used the Home Sweet Home Halloween Add-On Die Set to finish the spooky house.  The tree and bats are from the Crafter’s Essentials Halloween Die Set and the cute ghosts (die-cut using some white glitter card stock) are from the Boo-gy Ghosts Die Set.

This slimline card is another favorite of mine.  I adhered the Boo To You Paper on some black slimline card base.  On another panel of SL Bristol smooth white card stock, I used some clouds stencil and distress oxide inks to create the night-time sky.

I then stamped the costume from the Dress-Up Quokka Halloween Add-on Stamp Set on some masking paper and fussy-cut using precision snips. I stamped the costumes first on some Neenah solar white card stock and used the mask to mask-off the image, then stamped the two quokkas from the  Dress-Up Quokka Stamp Set. By doing so, it created a seamless look.  I used my Scan N cut machine to cut the images out.

The filmstrip is from the Slimline Film Strip Border Dies.  I finished my design by adding more creepy elements to the card and used the  Happy Halloween Word Die with shadow as my sentiment.

My third sample is fairly simple!  For my card base, I used the Tri-Fold Scored Cards and Envelopes available at the shop with the Never-Ending Square die set to create the windows.  I once again ink-blended the background with some distress oxide inks and clouds stencil.  I cut a piece of patterned paper from the Boo To You Paper Pack and adhered on the inside with liquid glue. 

The cute ghosts from the Boo-gy Ghosts Die Set were die-cut on some glitter card stock.  I finished the design by adding some Purple Pearls and the sentiment Lift Your Spirits that I die-cut with some black and white card stock.

(Inside view of the tri-fold card)

The matching envelope using the Happy Mail Mini SL Envelope Die Set and Boo To You SL Paper Pack.

I hope you like my samples today. The supplies are listed and linked below. Don’t forget to leave a comment on the main Kat Scrappiness Release blog post to join the giveaway by clicking on this GIVEAWAY LINK!

Thanks for stopping by and HAPPY SHOPPING!

———-SUPPLIES——-

DISCLOSURE. *I belong to a few design teams with affiliate programs and link these supplies at the end of each blog post. If you click on my affiliate link, I will receive a small commission at no additional cost to you. I use these funds to pay for the cost of running this blog. If you like what I do, please consider supporting me by clicking on these links. Thank you so much!