NND January Release Day 1 -Heartfelt Love & Heartfelt Roses

It is that time of the month where the entire design team get so excited to show off the new stamps, dies and/or stencils by Newton’s Nook Designs.  You also have a chance to win the stamp set being revealed each day so please read through til the end of the blog post to find out more info.  [Just a little important note:  I know some of you had difficulties finding the comments section.  If you would like to leave a comment to participate in the giveaway, the “comments section” will only be ever visible when a single post on Word Press is being viewed. Please click on this particular blog post and you will be able to leave a comment below.  Thank you!]  

For the first day of the reveals we are featuring the Heartfelt Love & Heartfelt Love Stamp sets, along with the Heart Frames die that also coordinates with the previously released Banner Trio die set.

To make my first card, I started by using the Heart Frames die set to die-cut the scallop heart with some Neenah solar white card stock.  I stamped the image on this piece with some Memento Rich Cocoa ink and colored the images in with alcohol markers.  I also used the biggest die to die-cut some red card stock.

Next, I used the third stitched die from the set, and die-cut the scallop panel that I previously colored.  I adhered the outer layer on the red card stock with liquid glue, then foam-mounted the middle piece for added dimension.  This gave it some nice layers without overwhelming the whole design.

I finished my design by stamping the sentiment with Versamark ink on the sentiment strip that I die-cut using one of the dies from the Banner Trio die set, and adhered with my tape runner in the middle of the card.

The second card is relatively simple but I really LOVE how this one turned out.

I die-cut the scallop frame on some Bristol Smooth white card stock using the scallop doe from the Frames & Flags die set.  I positioned this panel inside my Misti stamping tool and stamped the images twice with some Versafine Onyx black ink.  I colored the images in with my Zig Clean Color Real Brush Markers.   I forgot how much I love these markers!

I die-cut the arrows using a retired die-set called Points & Plumes and adhered onto the panel with liquid glue for added texture.  I stamped the sentiment on a die-cut strip from the Banner Trio die set, with some Versamark ink and sprinkled some white embossing powder, before heat-setting with my heating tool.  I foam-mounted this piece onto the  card.

Lastly, I finished my design by adding some clear mirror confetti dots for added texture.  Here’s another look:

 

Would you like to win the “Heartfelt Love” or the “Heartfelt Roses” Stamp Set? We will choose ONE lucky winner for each stamp set!

Here’s how to win: Comment on the NND blog and Design Team blogs (see list below)! The winner will be chosen at random from the collective reveal posts. Make sure to check out each of their blogs and comment for your chance to win. You will not know which blog has been chosen so the more you comment on the better your chances are of winning! You have until Thursday, January 21st at 9pm EST to comment  — winners will be announced on the blog post on Friday, January 2nd.

Check out all the awesome Design Team Blogs below to enter:

Newton’s Nook Designs

Ellen Haxelmans

Tina Herbeck

Larissa Heskett

Samantha Mann

Zsofia Molnar

Maria Russell (you are here)

Farhana Sarker

Tatiana Trafimovich

Samantha VanArnhem

 

———-SUPPLIES———


You’re One of a Kind with LDRS Creative

Hello my crafty friends!  Maria Russell with you today on the LDRS blog with a simple “Valentine-themed” card showcasing one of my favorite stamp sets from the shop.  I am featuring the A2 Stitched Layered Card Toppers die setUp & Away stamp set and dies, along with the Rainy Day StencilAnytime Stack stamp setSentiment Stack Coordinating Die and In the Breeze die

Since Valentine’s Day is fast-approaching, I thought I’d get a head start and create some simple cards that you can easily mass-produce to send to friends.  I started by stamping my images on some Neenah Classic Crest Solar White Card Stock with Raven Hybrid Ink and colored the images in with alcohol markers.  I used the Up & Away die set to die-cut the images.

Next, I cut a panel of Neenah Classic Crest Solar White Card Stock using the A2 Stitched Layered Card Toppers die set.  I started to create my outdoor scene with the Rainy Day Stencil, a blending brush and Pistachios-A-Plenty Hybrid Ink for the grass.  The pink clouds were created with the same Rainy Day Stencil, blending brush and Soft Kisses Hybrid Ink.  I don’t know about you but this color-combo just screams “valentine’s” to me!

I used the In the Breeze die for added texture and adhered this panel on an A2-size card base.

Next, I adhered the images on the card with some liquid glue.  I finished my design by adding the sentiment “You’re One of a Kind“, that was earlier stamped on some black card stock using the Anytime Stack stamp set and Sentiment Stack Coordinating Die.  These stamp-and-die combo is one of my favorites because you can stamp the sentiments and die-cut a bunch with just one pass on your die-cutting machine.  LDRS has a few of these awesome stamps so check them all out at the shop and grab your favorites.  

I really love how this card turned out, don’t you?!  The supplies I use are listed and linked below.  Thanks so much for stopping by!

———SUPPLIES———

Love You With All My Heart with LDRS Creative

Hello there and Happy New Year’s eve!  Maria Russell here on the blog with you sharing a cutesy valentine’s card, showcasing the Panda Play stamp set and coordinating dies, along with the Down Main Street Border dieRainy Day stencilDie-licious 6×6 paper padAnytime Stack stamp set and Sentiment Stack die set.
To begin, I stamped the Pandas on some Neenah Solar White card stock with Raven Hybrid Ink and colored the images in with alcohol markers.  I used the coordinating dies to die-cut the images.
On another panel of Neenah Solar White card stock, I used the Rainy Day stencil and Soft Kisses Hybrid Ink to create the clouds.
Next, I die-cut the little houses using the Down Main Street Border die.  I covered the holes with yellow card stock to create the illusion of lights coming through, and colored some of the parts with alcohol markers.  I foam mounted this piece on the background for added dimension.
The stripe border is from the LDRS stamp packaging.  I keep a few of these stripe borders in a ziplock so I can use them for my cards as accents here and there.  I also added the black strip of card stock to ground the little houses.  Next, I cut a strip of the beige card stock from the Die-licious 6×6 paper pad and adhered to the card using my ATG tape runner.
I foam-mounted the pandas for added dimension and covered the hearts with glossy accents for added texture and interest.  I finished my design by adding the Anytime Stack stamp set and Sentiment Stack die set.  Here’s another look at my card:
Who else is thinking about Valentine’s now?  I hope you like my card today.  The supplies I use are listed and linked below.  Thanks so much for stopping by and have a Happy New Year!
———–SUPPLIES———-


You’ve Got Me Floating On Air with Cas-ual Fridays Stamps

Happy Valentine’s Day everyone!!    I’m back today sharing this cute Valentine’s Day card showcasing the Some-bunny and Floating stamp sets by Cas-ual Fridays Stamps.

 

Before I proceed with my project, I’m just curious.  Who’s going out to dinner tonight to celebrate this occasion?  My hubby and I don’t normally go out on Valentine’s day.  He makes me a special dinner instead and it is sooooo much better than being in a restaurant because he is such a great cook!   For dinner tonight, hubby is making me Roast Duck with Black Cherry sauce.  Yum!
Okay, before I get hungry and start looking for an unhealthy snack, I might as well explain how I made my card.
to begin, I cut a 5 x 7 Bristol smooth white card stock and inked up the panel with my clouds and grass stencils, and distress oxide inks.  I set this panel aside to dry.
I stamped the images on some Neenah solar white card stock and used my TriBlend alcohol markers to color them in.  I fussy-cut the images with my Honey Bee scissors and adhered them together with liquid glue.
I adhered the images on the colored panel and added this to a 5×7 card base.
The sentiment was stamped with Versamark ink.  I sprinkled some white embossing powder and heat-set with my heating tool.  I foam-mounted this piece on my card to give it more depth & dimension.  Here’s my card:

To finish my design, I adhered the yellow stars and added a red heart on the bunny’s chest.   Here’s a closer look:

I hope you like my Valentine’s card today.  The supplies I used are listed and linked below.  Please don’t forget to use my coupon code below for 15% off your order.
Thanks for stopping by and have an amazing day!

—————-SUPPLIES—————–


My Heart Beats For You with Cas-ual Fridays

Hello my crafty peeps! I am also on the Cas-ual Fridays blog today with this super CAS Valentine’s Day card, showcasing the Love Notes stamp set and the Heart Note Fri-Die.

Valentine’s Day is fast approaching and I want to get my cards done (and mailed) a few days before the occasion (here’s hoping it reaches the recipient before the actual day!).

The card I made is super simple.  I cut an A2 size Neenah solar white card stock and used my embossing Sizzix 3D embossing folder to dry emboss the card.

I die-cut the Heart Note Fri-Die in different shades of pink and red (should I call this color fifty shades of pink?  haha!).  I adhered and layered the heart notes together using liquid glue.   I foam-mounted this piece on my embossed background.

I added some glossy accents to the red heart for more texture and dimension.  Since you can’t see the gloss on the main photo, here’s a little close-up:

I stamped the sentiment on some black strip.  I sprinkled some embossing powder and heat-set using my Wagner heating tool.  I adhered the sentiment on the card with some liquid adhesive.  Here’s the card:

Simple yet elegant!  Here’s another look:

 

I hope you like my card today.   The supplies I used are listed and linked below.  Please don’t forget to use my coupon code (below)  at Cas-ual Fridays for an additional 15% off your order.

Have an amazing day and happy stamping!

———-SUPPLIES———-

Happy Valentine’s Day Card with Cas-ual Fridays

Hello CFS fans! Maria here on the blog with you today, sharing a Valentine’s Day shaker card, showcasing the Hearts A2 Panel Fri-die and the sentiment is from the Love Notes stamp set.

To begin, I started off ink-blending a rainbow background on Bristol smooth white card stock with Distress Oxide inks in Mustard Seed, Ripe Persimmon, Worn Lipstick, Peacock Feathers and Seedless Preserves.

I die-cut my ink-blended panel with the Hearts A2 Panel Fri-die.  I adhered some acetate sheet on this piece and added foam adhesive to create my shaker panel.

I added some rainbow confetti dots as my shaker element and adhered the panel on top of an A2-size black card base.

I stamped the sentiment on a black strip with versamark ink and sprinkled some white embossing powder.  I used my heating tool to heat emboss the sentiment and adhered this piece on my card with my tape runner.  Here’s what it looks like:

The black background just made the rainbow panel pop.  Here’s a closer look:

I hope you like my project today.  The supplies I used are listed and linked below.  Please use my coupon code below for an additional 15% off your order at Cas-ual Fridays.  Thanks for stopping by and happy stamping!

—————SUPPLIES——————

Kat Scrappiness January Release – Day 2

Hello my crafty peeps!  It is day 2 of the January release by Kat Scrappiness and the design team is showcasing the new “I Love You” shadow dies.   We also have a giveaway every day during release week.  We are picking one winner for each release day so a total of three winners!  Please head on over the the Kat Scrappiness blog post to leave a comment.  Here’s the link:  http://katscrappinessblog.com/january-release-day-2-i-love-you-shadow-dies/

I started out by stamping the images on some 110 lb card stock.  I used the stamp set from Altenew called Watercolor dots.  I embossed this piece using a hearts embossing folder that I purchased from Hobby Lobby.  I also die-cut two tags using the Stitched Scalloped Nesting dies.

I die-cut the word “love” from the new I Love You shadow dies on pink, and die-cut the shadow with some vellum.  I used my hearts embossing folder to emboss the white tag and adhered this piece on the black tag to layer it.  I adhered the “love” sentiment.  I stamped the sentiment on black card stock with versamark and heat-set this with my heating tool.

katscrapiloveyoudie1a

To finish my design, I die-cut the bow from my stash and adhered the red heart from the heart sprinkles embellishment mix.   Here’s a closer look:

katscrapiloveyoudie1b

I really love how this card turned out.  Even though the background is busy, the design kind of worked, don’t you think?

katscrapiloveyoudie1c

I hope you like my project today.  Don’t forget to check out the blog post on Kat Scrappiness to leave a comment.  Tomorrow is the last day so head on over there!  I hope you guys win.  The supplies I used are listed and linked below. Have an amazing day!

—————SUPPLIES————



Kat Scrappiness Dies with Lawn Fawn Sweet Friends

I hope you all had a great Valentine’s Day yesterday!  I have two cute cards for you today showcasing the (new) Large Alpha Dies, Distressed Edge Circle Dies, Distressed Edge Rectangle Dies, Fancy Scalloped Edge Dies by Kat Scrappiness, with Lawn Fawn’s Sweet Friends stamp set and Sweet Friends Lawn Cuts dies.

Even though these two cards have hearts, they are not for Valentine’s Day.  My friends and I love s’mores and I thought the Sweet Friends stamp set with the Large Alpha Dies and other dies by Kat Scrappiness would be perfect to use for my cards today.

I have a process video for you so I will keep this blog post short.  Here are my cards:

KatScrapAlpha2

KatScrapAlpha1

Here’s the process video:

I hope I have inspired you today.  If you like to purchase the products I used, they are listed and linked below.  Please don’t forget to use my coupon code “MARIA10” for 10% off your order.  Please also check out the Valentine’s Day sale at the shop as they are only valid until February 18, 2017.  Have a wonderful day!

KatScrap Valentine's Sale

 ——–SUPPLIES———-


Chocolate Shaker Card with Kat Scrappiness

Are you looking for a simple Valentine’s Day card without all the hearts and romantic stuff? Or just a simple “just-because” card to brighten someone’s day?  For my project today, I am showcasing the Layered Chocolate Bar 6″ x 8″ stamp set, the Chocolate Lover’s Sentiment stamp set, Sparkling Manhattan sequin mix, Distressed Edge Rectangle dies and the Wonky Wavy Stitched Rectangle dies.

I started out by stamping the layered chocolate bar stamp using my Tim Holtz Tonic stamp platform with my memento tuxedo black ink.  I used my precision-cut scissors to fuzzy-cut the images.

IMG_6823

I also cut the little chocolate squares to add to my project.

IMG_6824

It has been awhile since I made a shaker card so I thought I’d make them today.  I die-cut my 110 lb. white card stock with the wonky wavy stitched dies.  I die-cut the middle using the second of the largest piece of the distressed edge rectangle dies to create the window.

I cut a piece of acetate to cover the window and adhered the chocolate bar at the bottom left side corner.  I added some 3M foam tape.  I decided to use my Cinnamon Swirl Mix sequins for my shaker element and the chocolate squares but since the sequin mix I used is not available anymore at the store, you can also use the Sparkling Manhattan sequin mix.  to finish the design, I stamped my sentiment using my Worn Lipstick Distress Oxide ink to give it a little bit of color.

Here’s the close-up of the card:

IMG_6821

I love this stamp set because the chocolate image looks so realistic!  There are so many possibilities using this stamp set.

KatScrapChocolate11

I hope you all got inspired to create this simple “Just-Because” card, or a “non-romantic” Valentine’s Day card that you can give to a friend to brighten up their day!  I have listed and linked the supplies I used below.  Thanks for stopping by today and have a wonderful day!

Maria Russell Signature Logo

—————SUPPLIES—————-