It is that time of the year again where all card designers get pumped and excited for the 2018 Card Design Superstar contest by MFT Stamps. I am completely bummed since I have just packed up my entire studio and shipped it back to my home in Orlando, FL about a month ago. I kept a few dies and stamps with me to get by, until I get my shipment. Needless to say, most of my MFT stamps are in the shipping container and I am left with 3 stamp sets and a few sentiments. However, that will not stop me from joining the contest! This card entry is for the Clean and Simple Genius category.
I started by stamping my image on some Neenah solar white card stock using MFT Stamps Black Licorice hybrid ink and colored him in with my Copic markers. I fussy-cut this image using my precision-cut scissors.
I die-cut the word “hello” a couple of times with some white card stock using the Hello There Die-namics by MFT stamps. I cut another piece of some white card stock with the Stitched Scallop Basic Edges Die-namics and adhered this piece onto my card base. I also adhered the Hello die-cuts onto my card panel, as well as my colored image.
To finish my design, I stamped the sentiment “A Happy Hello”. Here’s a little close-up:
I love creating Clean and Simple cards! Sometimes less is really more! I love how this card turned out! Here’s one last look:
I hope you like my card today! THANK YOU SO MUCH MFT Stamps for this great opportunity! Good luck to everyone playing along! The supplies I used are listed and linked below. Happy crafting!
MFT Supplies Used:
- A Happy Hello stamp set
- Black Licorice Hybrid Ink
- Hello There Die-namics
- Stitched Scallop Basic Edges Die-namics
Hello my crafty friends! This week, the Xyron Design Team is sharing our Halloween projects. I am back today to share mine, showcasing some Lawn Fawn products and my favorite adhesives by Xyron i.e., the 1.5 Inch Sticker Maker and the Mega Tape Runner.
This little treat box can also be used as a cute Halloween decor if you put an LED Tea Light inside and it will illuminate the box. Here are the photos:
I also have a process video below for you today to show you how I assembled the box.
And here’s an additional Halloween card for you. Who else loves the Addams Family? I do. I used to watch it all the time when I was a kid. When I saw this stamp set by The Sassy Club, I just knew I had to order them all to create some cute cards, or decorate my planner. Here’s my card:
I hope you like my projects today with the process video. Have an amazing day!
I finally made another card for my third and final entry for the 2017 Card Design Superstar. The card that you see below is my entry for the “Coloring Virtuoso” category. I love MFT Stamps and for today’s card, I am showcasing a lot of these stamps and dies that I have been collecting over the years. The products I used will be listed below, and they are all available at www.mftstamps.com.
I started out by stamping my images from the Our Story stamp set, with the Make Yourself At Home stamp set on white card stock with the MFT Stamps Black Licorice Hybrid Ink. I thought these two stamp sets would be the perfect pair to create my card. I colored the images in with my Copic markers. I have always loved coloring with my Copic markers! I die-cut the images with the coordinating dies.
I wanted to give my little girl a nice starry, colorful window background so I used a combination of different inks to blend the colors on smooth white card stock. I used the Die-namics Starry Circle to die-cut the background. I also used the same die to die-cut my card front. I wanted to inlay all of my die-cut elements on the card for my scene. For the “flooring”, I dry-embossed my white card stock and die-cut it using the Die-namics Stitched Basic Edges 2.
Here’s my card:
I hope you like my card. Please visit http://www.mftstamps.com to purchase the supplies I used for the card. Have an amazing day!
BB Our Story Stamp Set
Die-namics BB Our Story
Make Yourself At Home Stamp Set
Die-namics LJD Make Yourself At Home
Die-namics Stitched Basic Edges 2
Die-namics Starry Circle
The MFT 2017 Card Design Superstar is here and I am super excited to participate. The card that you see below is my entry for the “Innovation Master” category. I have always loved MFT Stamps and for today’s card, I am showcasing a lot of these stamps and dies. The products I used will be listed below, and they are all available at www.mftstamps.com.
I started out by stamping my images on white card stock with the MFT Stamps Black Licorice Hybrid Ink and colored the images in with my Copic markers. I thought the new Happy Haunting stamp set would be the perfect pair with the Frightful Friends stamp set (released by MFT Stamps last year). I die-cut the images with the coordinating dies.
I die-cut all of the elements I needed for my scene. For the frame, I used the Die-namics Blueprints No. 32, the Die-namics Stitched Clouds Edges, and the Die-namics Birch Trees.
I die-cut an A2 size Vellum card stock because I wanted to create a see-through scene so that I can also use this card to display on my Halloween mantle. I wanted to use an LED tea-light to give a spooky glow behind Mr. and Mrs. Frankenstein. I love how this card turned out.
Here’s the card without the LED tea-light behind it.
Here’s the card with the LED Tea-Light on! Don’t you just love the moon peaking from behind the clouds and birch trees?
Here’s a close-up of the card with the LED Tea-light. It looks so good on my Halloween mantle display.
I hope you like my card. Please visit http://www.mftstamps.com to purchase the products I have listed below. Have an amazing day!
Happy Haunting Stamp Set
Happy haunting Die-namics
Frightful Friends Stamp Set
Frightful Friends Die-namics
Die-namics Blueprints No. 32
Die-namics Stitched Clouds Edges
Die-namics Birch Trees
Die-namics Hillside Grassy Hills
MFT Stamps Black Licorice Hybrid Ink
The MFT Card Design Superstar is finally here! The card that you see below is my entry for the “Clean and Simple Genius” category.
Sometimes, less is really more! I wanted to create a clean and simple Halloween card with non-traditional Halloween colors. I also like the white pumpkins as fall decor, which is why I colored the pumpkins with light gray Copic markers. I wanted my focal point to be on the little witch and her cat. These images are so adorable!
I started out by stamping my images on Bristol Smooth 110 lb. white card stock using my MFT stamps Black Licorice hybrid ink. I used Copic markers to color my images in and used the coordinating dies to die-cut the images.
For my “subtle” sky scene, I used the clouds stencils with my light blue inkpad, lightly sponging the color on the card stock.
For the frame, I used my MFT Stamps Blueprints No. 32. I also die-cut the birch trees with the Birch Trees dies, also by MFT then lightly colored it with my Copic markers to give it some dimension.
To finish my design, I stamped the sentiment “A Halloween Hello” with my memento fog ink.
Here’s my card:
What do you guys think? I hope you like my clean and simple card. The supplies I used to create the card are listed and linked to the MFT online store. Wish me luck and thank you for stopping by!
BB Witch Way is the Candy Stamp Set
BB Witch Way is the Candy Die-Namics
Birch Trees Die-Namics
Die-Namics Blueprints No. 32
Clouds Stencil – Large
Clouds Mini Edges Stencil
Black Licorice Hybrid Ink
There is a new sketch challenge at My Favorite Things so I decided to play along. Here’s the sketch:
I am showcasing the BB Witch Way is the Candy stamp set and dies by MFT Stamps. Don’t you just love the images on this set? I hope you like my card and thank you so much for stopping by. Have an amazing day!
I finally had some down-time this week and was able to play with my Otterly Love You stamp set and dies by MFT Stamps.
I started out by stamping my images on Neenah solar white card stock using my Lawn Fawn Jet Black Ink pad. I colored the images in with my Copic markers. I wanted to achieve soft coloring on my Otters and I used my E40 and E41 markers, highlighting their cheeks with R00.
I die-cut my front window frame panel using a die from my stash, and die-cut the blue vellum paper to achieve the look of water.
I used my clouds border die to die-cut the clouds using Inkadinkado masking paper, with my broken china distress ink to achieve the look of clouds on the front panel.
I finished off the design by adding the light blue coral from another stamp set. I hope you like my card today and got inspired. I have also listed and linked the supplies I have used. Have a great weekend!
I’m sharing my design team projects today for Not2ShabbyShop showcasing MFT Stamps Beast Friends stamp set and beast friends die-namics. I am going to keep this blog post short because I have a process video below if you would like to see it.
Here is the photo:
Here is the process video for one of the cards and tag:
Let’s get into the holiday spirit and create some Christmas projects today. I am back to share with you some design team projects for http://www.not2shabbyshop.com showcasing the cutest Lawn Fawn’s Winter Unicorn stamp set and die, with MFT Stamps LJD Peek-A-Boo Die-namics and Lawn Fawn Tiny Tags sayings.
I’ve shared a process video if you would like to see how I made the card and one of the tags.