Seasonal Maple Bag Tags with Artesprix Sublimation Markers & Ink Pad

Create cute seasonal maple bag tags with the Art of Sublimation!

Learn how to create one-of-a-kind seasonal bag tags with Artesprix Sublimation Markers and Ink Pad!

Hello! Maria Russell here again and I am super excited to share with you today’s project! Since I’ve already created some summer-themed bag tags a few months ago, I thought I’d share more projects today celebrating Halloween, Winter and Spring seasons.

This image has an empty alt attribute; its file name is Art_MapleBagTags1A.jpg
 
 

Here’s what you’ll need to create the project.

This image has an empty alt attribute; its file name is IMG_8362-1024x768.jpeg
 
 

Materials:

Tools:

This image has an empty alt attribute; its file name is IMG_8378-768x1024.jpeg
 
 

Step-by-Step Tutorial:

Step 1.

Trace your maple tag on plain typing paper with a pencil.

This image has an empty alt attribute; its file name is IMG_8363-768x1024.jpeg
 
 

Step 2.

Before I stamped the images, I refilled my Artesprix Sublimation Stamp Pad with the (new) Sublimation Stamp Ink Refill. Since I was creating 3 designs, I wanted to make sure that my stamp pad is juicy so that my images will look crisp when stamped on the paper.

This image has an empty alt attribute; its file name is IMG_8364-768x1024.jpeg
Add a few drops of the ink and use a plastic card to spread them evenly on the pad.
 
 

Step 3.

Place your design inside the stamping tool and position the stamp. I free-handed the hill using the Black Sublimation Marker in fine-point.

This image has an empty alt attribute; its file name is IMG_8365-768x1024.jpeg
 
 

Use the Artesprix Sublimation Stamp Pad to stamp the images and color with the Sublimation Markers. I repeated these steps for the three tags, assembly-line style.

This image has an empty alt attribute; its file name is IMG_8367-768x1024.jpeg
 
 

Step 4.

Secure your design on your Maple Bag Tag by using Artesprix Heat Tape. If you are going to sublimate using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need a few more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Step 5.

Turn your Artesprix Heat Press on and set the temperature to 400 degrees Fahrenheit and the timer for 45 seconds. Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your Artesprix Halloween Decorative Metal Panel on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

This image has an empty alt attribute; its file name is IMG_8373-768x1024.jpeg
 
 

Step 6.

I sublimated the tags one after another (“assembly-line style“). This made it easier for me to get them all done while the machine is on!

This image has an empty alt attribute; its file name is IMG_8378-1-768x1024.jpeg
 
 

Step 7

While wearing protective gloves, lift the handle and take your Sublimated Maple Bag tags out of the machine and sublimate the others. Place them all on top of the Protective Project Mat and give it about half an hour to cool it down.

Step 7.

Gently remove the paper to reveal the Sublimated Maple Bag Tag.

This image has an empty alt attribute; its file name is IMG_8379-1024x768.jpeg
 
 

Step 8

I created a double-sided Halloween Tag. Here’s the design:

This image has an empty alt attribute; its file name is IMG_8372-1024x768.jpeg
 
 

Here’s what it looks like after sublimation:

This image has an empty alt attribute; its file name is Art_MapleBagTags1D.jpg
 
 

I didn’t add any sentiments on this design. Since I LOVE Halloween images so much, I can use this bag tag all-year round!

Here are the three Maple Bag Tags –> Halloween/Fall, Woodland/Winter theme and a floral one for Spring:

This image has an empty alt attribute; its file name is Art_MapleBagTags1C.jpg
 
 

Join in the Iron-on-Ink Fun!

Love this All-seasons Maple bag tags project? Join the Iron on Ink Community on Facebook for more project ideas and to share your own creative iron-on ink projects.

If you like this project, you need to check out Nicole Martel’s Picture Frame Design.

You will find all the blanks and other supplies available for purchase on the Artespix website. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

———-SUPPLIES————

D.I.Y. Halloween Decorative Metal Panel with Artesprix

Too cute to Spook? Get Ready for Halloween and Create this Cute Home Decor with the art of sublimation!

Learn how to create one-of-a-kind Halloween decor with Sublimation Markers and Ink Pad!

Hello, Artesprix fans! I am super excited to share with you today’s project!  Halloween is my favorite holiday and I go all-out decorating my home! I wanted to do a little bit of mixed-media on this metal panel and I love how this one turned out!

This image has an empty alt attribute; its file name is Art_MetalPanel1C.jpg
 
 

Here’s what you’ll need to create the project.

Materials you'll need.
 
 

Materials:

Tools:

Heat Press
 
 

Step-by-Step Tutorial:

Step 1.

Type and print out the sentiment on a plain piece of typing paper. Trace your blank, making sure your design is centered.

This image has an empty alt attribute; its file name is IMG_8168-768x1024.jpeg
 
 

Step 2.

Flip your design and trace the sentiment using Artesprix Black Sublimation Marker in Fine Point [Designer tip: use a light box so that you can easily trace the sentiment].

This image has an empty alt attribute; its file name is IMG_8172-768x1024.jpeg
 
 

Step 3.

Place your design inside the stamping tool and position the stamp. Use the Artesprix Sublimation Stamp Pad to stamp the images.

Using a stamping tool will enable you to stamp the images a couple of times on the exact position.
 
 

Step 4.

Color the images using Artesprix Sublimation markers.

it looks muted on paper at first. It will look so much vibrant after you heat press.
 
 

Step 5.

Secure your design on your blank by using Artesprix Heat Tape [Designer tip: I used my light box once again to make sure that my design is straight and perfectly centered]. If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Using a light box will help you position the design perfectly.
 
 

Step 6.

Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 90 seconds. Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

Ensure to cover your design with Artesprix Protective Paper.
 
 

Step 7.

While wearing protective gloves, lift the handle and take your Sublimated Metal Panel out of the machine. Place the metal panel on top of the Protective Project Mat and give it about half an hour to cool it down.

It is important to wear heat-protective gloves while doing this process.
 
 

Step 8

Gently remove the paper to reveal the design!

Make sure to wait about half an hour before touching the metal panel.
 
 

Step 9

Use a die from your collection to add the cute ghost. I’ve die-cut the ghost four times on some 110 lb. card stock for added dimension. I also added the cute bow and some sparkling jewel to create more texture. Use your glue gun to adhere this piece onto the panel.

Die-cut the piece 4 times and adhere with liquid glue.
 
 

Here’s a closer look at the decorative panel:

Mixed Media Halloween Decor
 
 

Isn’t this too cute to spook? I had so much fun creating this cute Halloween Metal Panel. I can’t wait to create one as a fall decor and one for Christmas!

This image has an empty alt attribute; its file name is Art_MetalPanel1A.jpg
 
 

Join in the Iron-on-Ink Fun!

Love this D.I.Y Halloween Decorative Metal Panel project? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron-on ink projects.

Don’t forget to save this to Pinterest and share with all your friends!

If you like this project, you need to check out Gina Knuppenberg’s Sublimation Vinyl Project.

You will find all the blanks and other supplies available for purchase on the Artespix website**. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

——–SUPPLIES——–

 
 

D.I.Y. Halloween Pet Bandana with Artesprix Sublimation Markers

Dress-up your pet this Halloween with this cute Bandana Project!

Learn how to create a one-of-a-kind Halloween Pet Bandana with your sublimation markers!

Hello Artesprix fans! It’s Maria Russell and it’s my turn today to share a really cute project, showcasing Artesprix’s sublimation markers and ink pad along with the Artesprix Pet Bandana in medium.

Here’s what you’ll need to create the project.

Materials:

Tools:

Artesprix Heat Press.

Step-by-Step Tutorial:

Step 1.

Type and print out your pet’s name on a plain piece of typing paper.

Step 2.

Flip your design and use your pencil to draw lines, making sure you are covering your pet’s name. If you have a light box, turn it on and place your design on top.

Step 3.

Use another plain typing paper and trace your pet’s name using a pencil. [Designer tip: this method will enable you to get a silhouette of your pet’s name]. Use Artesprix’s Black Sublimation Marker in Fine Point to trace the silhouette on your typing paper.

The pencil helped me get a slight shadow of my pet's name.  It made it easier for me to trace it using the sublimation marker.
The pencil helped me get a slight shadow of my pet’s name. It made it easier for me to trace it using the sublimation marker.

Step 4.

This is what it looks like when you are done tracing the name:

By using a pencil, it will be easier to trace your pets name to get a mirror image.
By using the pencil, it will be easier to trace your pet’s name to get a mirror image.

Step 5.

Add some cute images on your design. I used one of my favorite Halloween stamp set and stamped them using the Artesprix Sublimation Stamp Pad.

stamp additional images on your typing paper.
Stamp additional images on your typing paper.
This is what it looks like after stamping.

Step 6.

Color the images with Artesprix Sublimation Markers.

color images with Artesprix sublimation markers.

Step 7.

It is important to use a lint roller to remove any unnecessary particles on your blank before pressing. This will ensure a clean crisp design transfer to your Artesprix Pet Bandana.

Secure your design on your blank by using Artesprix Heat Tape. [Designer tip: I used my LED light box to make sure that my images are perfectly centered. ] If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Position your design on top of your blank and secure it with the heat tape.

Step 8.

Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 30 seconds.

Step 9.

Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

Step 10.

While wearing protective gloves, lift the handle and take your sublimated Pet Bandana. Place the bandana on top of the Protective Project Mat and give it a few minutes to cool down. Gently remove the paper to reveal the design!

I had so much fun creating this D.I.Y Halloween Pet Bandana. The challenge for me now is to actually get my cat to wear it on Halloween!

Here’s a closer look:

I love the little ghost holding the candles and the lollipop! This design turned out to be cute and whimsical!

Join in the Iron-on-Ink Fun!

Love this D.I.Y Halloween Pet Bandanaproject? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron-on ink projects.

Don’t forget to save this to Pinterest and share with all your friends!

If you like this project, you need to check out Ivy Rivera’s Artesprix Flocked Sublimation T-shirt project.

You will find all the blanks and other supplies available for purchase on the Artespix website. They are also listed and linked below. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

———-SUPPLIES———-

DIY Poly Canvas Zip Case with Artesprix’s Sublimation Markers & Ink Pad – Be a Unicorn

Create A Cute D.I.Y. Make-up bag using Artesprix Sublimation Markers and Ink Pad with the Poly Canvas Zip Case

Hello Artesprix fans! I am back with another fun project, using Artesprix’s sublimation markers and ink pads along with the Poly Canvas Zip Case.

Here’s what you’ll need to create the project.

Materials:

Tools:

Step-by-Step Tutorial:

Step 1.

Place the Poly Canvas Zip Case on a piece of plain copy paper and trace the outline using a pencil to determine the area that you have to work on.

Step 2.

I free-handed my rainbow using Artepsrix Pastel Sublimation Markers.

Step 3.

I traced the Unicorn’s ears using a pencil and the coordinating die that came from the stamp set.

Step 4.

I used my Artesprix Fine Point Black Sublimation Marker to draw the Unicorn’s ears.

Step 5.

I placed my design inside my stamping tool to stamp the rest of the images, using the Artesprix Sublimation Stamp Pad.

Step 6.

I Placed my design on the light box to trace the sentiment using my Sublimation Marker.

Step 7.

Before you attach the design on your blank, make sure that you use a lint remover to remove any hair or unwanted particles.

Using Artesprix Heat Tape, tape your blank down to your design. [Designer tip: I used my LED light box to make sure that my images are perfectly centered. ] If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Step 8.

Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 45 seconds. Once you reach your desired temperature, you are ready to heat press.

Step 9.

Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. [Designer tip: Make sure that your design is facing the heat source and the zipper is out of the way before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

Step 10.

While wearing protective gloves, lift the handle, and take your design and place them on the Protective Project Mat. Wait for a few minutes until it is cool enough to reveal your design. Gently remove the paper to reveal the design!

Step 11.

I wanted to add some “bling” so I decided to add some rhinestone jewels to the flowers. I used my super-strong mixed media glue to adhere them onto the zip case. I also added the gold bow to finish my design.

Here’s the full reveal! It turned out so CUTE!

I love how the Sublimation Markers just blended so well to create the pastel rainbow! Here’s a closer look:

Be a Unicorn in a field of horses!

Now that I have made this project, I cannot wait to create some T-shirts and Pet Bandanas! I really love how this one turned out!

 

Join in the Iron-on-Ink Fun!

Love this project? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron-on ink projects.

If you like this project, you need to check out Gina Knuppenberg’s Mixed Media Bag Tags!

You will find all the blanks and other supplies available for purchase on the Artespix website. I have also listed and linked them below.** Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

———SUPPLIES———-

Cute DIY Key Chains with Iron On Ink Sublimation Markers

Why blend in when you can stand out?  Create some cute DIY key chains with Iron on Ink Sublimation markers!

Hello, my crafty friends! I am back today with another cute project for Artesprix creating my own DIY key chains.

Here’s what you’ll need to create the project.

Materials:

Tools:

Artesprix Heat Press.

Step-by-step Tutorial:

Step 1.

Place the metal key chain on a piece of plain copy paper and trace the outline using a pencil to determine the area that you have to work on.

Helpful tip: By tracing the outline, you’ll be able to center your design onto your blank.

Step 2.

Mount your stamp on an acrylic block (or stamping tool) and stamp the image on the copy paper using Artesprix Sublimation Ink Pad. Repeat this process for the rest of the images that you need to use for your key chain.

I used a stamping tool to stamp the images three times to create a good impression.

Step 3.

Next, color your stamp design using your Iron-on-Ink sublimation markers. I used the Artesprix Original, Gnomie Botanical, and Pastel Sublimation Markers to color my images. The colors may look a little muted at first.

Step 4.

Place the Mirrored Sublimation 6×6 Stencil on top of the design and trace the letter with the Medium-point Black Sublimation marker

Step 5.

Using Artesprix Heat Tape, tape your blank down to your design. If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Step 6.

Now, it is time for a sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. Make sure that your design is facing up. Place it inside the Heat Press and close the machine.

Step 7.

The Heat Press will beep indicating that your project is finished! While wearing protective gloves, lift the handle and take your project out. Place it on top of the project mat and wait for about 20 minutes to cool down.

Step 8.

Gently remove the paper to reveal the design.

Step 9.

Repeat the process mentioned above and create another design.

I absolutely LOVE how both projects turned out!

If you like this DIY key chain, consider checking out some of the design team’s DIY on the blog. Here is another cute key chain project by Ivy

You will find all the blanks and other supplies available for purchase on the Artespix website. I have also listed and linked them below. Thank you for stopping by and happy crafting!

—————-SUPPLIES————-

DIY Bag Tags with Artesprix Sublimation Markers

Hello my crafty peeps! I am back today to share another fun project using Sublimation markers to create your own Bag Tags!

 

I am also sharing a process video to share some tips on how to get a clear impression of your images. The first Bag Tag that I made turned out cute but I had some bleeding issues with my marker. I created a second one to show you the difference between the two bag tags.

 

Materials:

Tools:

Step-by-step Tutorial:

Step 1.

First, place the bookmark on a piece of plain copy paper and trace the outline using a pencil. This will then determine the area that you have to work with. Don’t worry about the pencil lines because this will not transfer to your bag tag.

Step 2.

Mount your stamp on an acrylic block (or stamping tool) and stamp the image on the copy paper using Artesprix Sublimation Ink Pad. Repeat this process for the rest of the images that you need to use for your bookmark.

Helpful TIP No. 1: Stamp the sentiment first and trace using the Fine Point Sublimation Marker in Black before coloring the image. Use a heating tool to speed up the drying process before coloring everything to avoid bleeding on your images.

Step 3.

Next, color your stamp design using your Iron-on-Ink sublimation markers. I used the Artesprix Original, Gnomie Botanical and Pastel Sublimation Markers to color my images. Don’t worry if the color looks a little muted, it will come to life when the heat is applied to your project.

Step 4.

Take your Bag Tag and place it against the ink. Use the Artesprix Heat Tape and tape it down so your design doesn’t shift. If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

If using an Artesprix Heat Press, set the temperature to 400 degrees F and timer to 45 seconds. If using a dry iron, set to linen or highest setting. [For a home iron, set to linen and “no steam.” Note: The holes in your home iron do not allow the heat to pass through evenly.]

Step 5.

Now, it is time for a sublimation sandwich. Cut two pieces of Artesprix Protective Paper to cover your project on the top and bottom. Place it inside the Heat Press and close the machine. You’ll want your Artesprix Project Mat handy because your project will be hot, and you don’t want it to damage your work space.

Step 6.

When the Heat Press beeps, this indicates that your project is ready. Pull the handle up and use protective gloves or oven mitts to protect your hands before taking the project out. Place it on top of the project mat and wait for about 20 minutes to cool down.

Step 7.

Gently remove the paper from the Bag Tag to reveal the design.

As you can see, I didn’t get a good impression on the sentiment for the first bag tag. The second one looks a lot better.

For the Bag Tag on the right, I stamped the sentiment first and traced it on the other side. I also used my heating tool to make sure that the sentiment is dry before I colored the entire background and the images. Here’s a closer look at the second tag.

I love being able to stamp or draw and color my designs on a plain piece of paper and transfer onto a blank to create a unique DIY project!

Helpful TIP no. 2 – If you are using an image printed out using your laser printer (traced using your sublimation marker), make sure to use the heat tape to “cover” any image or marks that you don’t want to get transferred onto your blank. I didn’t realize this until I heat press the tag. Take a look at the photo below:

For Tag No. 2, I used the Photopolymer Stamps – Hand Lettered Basics for the back of the Bag Tag.

 

The back of the second tag is what’s shown on the right in the photo below:

I absolutely LOVE the second tag. I am quite happy how it turned out and I think it looks really cute! I am planning on adding some iridescent gem stones to cover the bubbles and make it look 3D. For that, I think I will have to use a strong adhesive like E-6000. I will let you know how it turned out.

Here’s my process video:

 

You can FOLLOW this tutorial to create more than just Bag Tags. You will find all the blanks available for purchase on the Artespix website. The supplies are also listed and linked below. Thank you for stopping by and happy crafting!

 

———-SUPPLIES——-

 

DIY Bookmarks & Happy National Hamburger Day! with Artesprix

Happy National Hamburger Day! Is everyone excited for summer? Memorial Day kicked off this week and kids are excited that summer is finally almost here! Even though they’ve been doing homeschooling for the past months with their teachers on Zoom, they are now looking forward to just chilling out! No more schoolwork!

I have some fun projects to share with you today! You can create these DIY bookmarks with your kids, and they are going to LOVE it! Even if they don’t like reading, they will certainly have fun creating these bookmarks with you. I remember when my kids were little, they read books for hours during summer! Sometimes they even begged to stay up for another hour or two, so they can finish a few more chapters! These bookmarks are not only fun to make, but they will also help your kids remember where they stopped before they went to bed.

Materials

Tools:

Step-by-step Tutorial:

Place the bookmark on a piece of plain copy paper and trace the outline using a pencil. This will determine the area that you have to work with. Don’t worry about the pencil lines because this will not transfer on your bookmark.

Mount your stamp on an acrylic block and stamp the image on the copy paper using Artesprix Sublimation ink pad. Repeat this process for the rest of the images that you need to use for your bookmark. Note: If your kids would like to draw their own image, they can first use a pencil and trace their designs with the Artesprix Iron-On ink sublimation markers later on. Make sure they are doing a mirror image so that when their design applies to the bookmark, they wouldn’t look backwards.

Since I didn’t use any sentiments for the hamburger-themed bookmarks, I didn’t need to flip the images to trace it on the other side. I used the Artesprix Original, Gnomie Botanical and Pastel Sublimation Markers to color my images.

Don’t worry if the color looks a little muted, it will come to life when the heat is applied to your project.

Take your bookmark and place the “white side” against the ink. Use the Artesprix Heat Tape and tape it down so your design doesn’t shift. If you are using the Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

If using an Artesprix Heat Press, set the temperature to 400 deg. F and timer to 45 seconds. If using a dry iron, set to linen or highest setting. [For a home iron, set to linen and “no steam”. Note: The holes in your home iron do not allow the heat to pass through evenly.]

Now it is time for a sublimation sandwich. Cut two pieces of Artesprix Protective Paper to cover your project on the top and bottom. Place it inside the Heat Press and close the machine. You’ll want your Artesprix Project Mat handy because your project will be hot, and you don’t want it to damage your work space.

When the Heat Press beeps, this indicates that your project is ready. Pull the handle up and use protective gloves or oven mitts to protect your hands before taking the project out. Place it on top of the project mat and wait for about 10 minutes to cool down. Gently remove the paper from the bookmark to reveal the design.

I absolutely LOVE the two hamburger-themed bookmarks that I made that I decided to create another one. I did the same steps above to stamp and color my image. However, I wanted a sentiment for my design. I turned the paper and stamped the sentiment on the other side using the Artesprix Sublimation Ink Pad. I flipped the paper back and placed it onto a tracing pad. I used the Artesprix Iron-on Sublimation Black Fine-Point marker and traced the sentiment.

Here’s the other bookmark. Isn’t this adorable? It turned out so cute!

I love being able to stamp or draw and color my designs on a plain piece of paper and transfer onto a blank to create a unique DIY project! Your kids will certainly LOVE it! Here’s another look at the bookmarks:

You can FOLLOW this tutorial to create more than just bookmarks. You can also create coasters, keychains, bag tags, picture frame, etc. The possibilities are endless!

Be sure to check out Artesprix’s YouTube channel, Instagram, Facebook group and blog for design team inspiration. The supplies I used are listed and linked below.  Thanks for stopping by and happy crafting!

 
——–SUPPLIES——–