Seasonal Maple Bag Tags with Artesprix Sublimation Markers & Ink Pad

Create cute seasonal maple bag tags with the Art of Sublimation!

Learn how to create one-of-a-kind seasonal bag tags with Artesprix Sublimation Markers and Ink Pad!

Hello! Maria Russell here again and I am super excited to share with you today’s project! Since I’ve already created some summer-themed bag tags a few months ago, I thought I’d share more projects today celebrating Halloween, Winter and Spring seasons.

This image has an empty alt attribute; its file name is Art_MapleBagTags1A.jpg
 
 

Here’s what you’ll need to create the project.

This image has an empty alt attribute; its file name is IMG_8362-1024x768.jpeg
 
 

Materials:

Tools:

This image has an empty alt attribute; its file name is IMG_8378-768x1024.jpeg
 
 

Step-by-Step Tutorial:

Step 1.

Trace your maple tag on plain typing paper with a pencil.

This image has an empty alt attribute; its file name is IMG_8363-768x1024.jpeg
 
 

Step 2.

Before I stamped the images, I refilled my Artesprix Sublimation Stamp Pad with the (new) Sublimation Stamp Ink Refill. Since I was creating 3 designs, I wanted to make sure that my stamp pad is juicy so that my images will look crisp when stamped on the paper.

This image has an empty alt attribute; its file name is IMG_8364-768x1024.jpeg
Add a few drops of the ink and use a plastic card to spread them evenly on the pad.
 
 

Step 3.

Place your design inside the stamping tool and position the stamp. I free-handed the hill using the Black Sublimation Marker in fine-point.

This image has an empty alt attribute; its file name is IMG_8365-768x1024.jpeg
 
 

Use the Artesprix Sublimation Stamp Pad to stamp the images and color with the Sublimation Markers. I repeated these steps for the three tags, assembly-line style.

This image has an empty alt attribute; its file name is IMG_8367-768x1024.jpeg
 
 

Step 4.

Secure your design on your Maple Bag Tag by using Artesprix Heat Tape. If you are going to sublimate using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need a few more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Step 5.

Turn your Artesprix Heat Press on and set the temperature to 400 degrees Fahrenheit and the timer for 45 seconds. Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your Artesprix Halloween Decorative Metal Panel on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

This image has an empty alt attribute; its file name is IMG_8373-768x1024.jpeg
 
 

Step 6.

I sublimated the tags one after another (“assembly-line style“). This made it easier for me to get them all done while the machine is on!

This image has an empty alt attribute; its file name is IMG_8378-1-768x1024.jpeg
 
 

Step 7

While wearing protective gloves, lift the handle and take your Sublimated Maple Bag tags out of the machine and sublimate the others. Place them all on top of the Protective Project Mat and give it about half an hour to cool it down.

Step 7.

Gently remove the paper to reveal the Sublimated Maple Bag Tag.

This image has an empty alt attribute; its file name is IMG_8379-1024x768.jpeg
 
 

Step 8

I created a double-sided Halloween Tag. Here’s the design:

This image has an empty alt attribute; its file name is IMG_8372-1024x768.jpeg
 
 

Here’s what it looks like after sublimation:

This image has an empty alt attribute; its file name is Art_MapleBagTags1D.jpg
 
 

I didn’t add any sentiments on this design. Since I LOVE Halloween images so much, I can use this bag tag all-year round!

Here are the three Maple Bag Tags –> Halloween/Fall, Woodland/Winter theme and a floral one for Spring:

This image has an empty alt attribute; its file name is Art_MapleBagTags1C.jpg
 
 

Join in the Iron-on-Ink Fun!

Love this All-seasons Maple bag tags project? Join the Iron on Ink Community on Facebook for more project ideas and to share your own creative iron-on ink projects.

If you like this project, you need to check out Nicole Martel’s Picture Frame Design.

You will find all the blanks and other supplies available for purchase on the Artespix website. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

———-SUPPLIES————

D.I.Y. Halloween Decorative Metal Panel with Artesprix

Too cute to Spook? Get Ready for Halloween and Create this Cute Home Decor with the art of sublimation!

Learn how to create one-of-a-kind Halloween decor with Sublimation Markers and Ink Pad!

Hello, Artesprix fans! I am super excited to share with you today’s project!  Halloween is my favorite holiday and I go all-out decorating my home! I wanted to do a little bit of mixed-media on this metal panel and I love how this one turned out!

This image has an empty alt attribute; its file name is Art_MetalPanel1C.jpg
 
 

Here’s what you’ll need to create the project.

Materials you'll need.
 
 

Materials:

Tools:

Heat Press
 
 

Step-by-Step Tutorial:

Step 1.

Type and print out the sentiment on a plain piece of typing paper. Trace your blank, making sure your design is centered.

This image has an empty alt attribute; its file name is IMG_8168-768x1024.jpeg
 
 

Step 2.

Flip your design and trace the sentiment using Artesprix Black Sublimation Marker in Fine Point [Designer tip: use a light box so that you can easily trace the sentiment].

This image has an empty alt attribute; its file name is IMG_8172-768x1024.jpeg
 
 

Step 3.

Place your design inside the stamping tool and position the stamp. Use the Artesprix Sublimation Stamp Pad to stamp the images.

Using a stamping tool will enable you to stamp the images a couple of times on the exact position.
 
 

Step 4.

Color the images using Artesprix Sublimation markers.

it looks muted on paper at first. It will look so much vibrant after you heat press.
 
 

Step 5.

Secure your design on your blank by using Artesprix Heat Tape [Designer tip: I used my light box once again to make sure that my design is straight and perfectly centered]. If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Using a light box will help you position the design perfectly.
 
 

Step 6.

Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 90 seconds. Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

Ensure to cover your design with Artesprix Protective Paper.
 
 

Step 7.

While wearing protective gloves, lift the handle and take your Sublimated Metal Panel out of the machine. Place the metal panel on top of the Protective Project Mat and give it about half an hour to cool it down.

It is important to wear heat-protective gloves while doing this process.
 
 

Step 8

Gently remove the paper to reveal the design!

Make sure to wait about half an hour before touching the metal panel.
 
 

Step 9

Use a die from your collection to add the cute ghost. I’ve die-cut the ghost four times on some 110 lb. card stock for added dimension. I also added the cute bow and some sparkling jewel to create more texture. Use your glue gun to adhere this piece onto the panel.

Die-cut the piece 4 times and adhere with liquid glue.
 
 

Here’s a closer look at the decorative panel:

Mixed Media Halloween Decor
 
 

Isn’t this too cute to spook? I had so much fun creating this cute Halloween Metal Panel. I can’t wait to create one as a fall decor and one for Christmas!

This image has an empty alt attribute; its file name is Art_MetalPanel1A.jpg
 
 

Join in the Iron-on-Ink Fun!

Love this D.I.Y Halloween Decorative Metal Panel project? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron-on ink projects.

Don’t forget to save this to Pinterest and share with all your friends!

If you like this project, you need to check out Gina Knuppenberg’s Sublimation Vinyl Project.

You will find all the blanks and other supplies available for purchase on the Artespix website**. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

——–SUPPLIES——–

 
 

D.I.Y. Halloween Pet Bandana with Artesprix Sublimation Markers

Dress-up your pet this Halloween with this cute Bandana Project!

Learn how to create a one-of-a-kind Halloween Pet Bandana with your sublimation markers!

Hello Artesprix fans! It’s Maria Russell and it’s my turn today to share a really cute project, showcasing Artesprix’s sublimation markers and ink pad along with the Artesprix Pet Bandana in medium.

Here’s what you’ll need to create the project.

Materials:

Tools:

Artesprix Heat Press.

Step-by-Step Tutorial:

Step 1.

Type and print out your pet’s name on a plain piece of typing paper.

Step 2.

Flip your design and use your pencil to draw lines, making sure you are covering your pet’s name. If you have a light box, turn it on and place your design on top.

Step 3.

Use another plain typing paper and trace your pet’s name using a pencil. [Designer tip: this method will enable you to get a silhouette of your pet’s name]. Use Artesprix’s Black Sublimation Marker in Fine Point to trace the silhouette on your typing paper.

The pencil helped me get a slight shadow of my pet's name.  It made it easier for me to trace it using the sublimation marker.
The pencil helped me get a slight shadow of my pet’s name. It made it easier for me to trace it using the sublimation marker.

Step 4.

This is what it looks like when you are done tracing the name:

By using a pencil, it will be easier to trace your pets name to get a mirror image.
By using the pencil, it will be easier to trace your pet’s name to get a mirror image.

Step 5.

Add some cute images on your design. I used one of my favorite Halloween stamp set and stamped them using the Artesprix Sublimation Stamp Pad.

stamp additional images on your typing paper.
Stamp additional images on your typing paper.
This is what it looks like after stamping.

Step 6.

Color the images with Artesprix Sublimation Markers.

color images with Artesprix sublimation markers.

Step 7.

It is important to use a lint roller to remove any unnecessary particles on your blank before pressing. This will ensure a clean crisp design transfer to your Artesprix Pet Bandana.

Secure your design on your blank by using Artesprix Heat Tape. [Designer tip: I used my LED light box to make sure that my images are perfectly centered. ] If you are using the Artesprix Heat Press, you only need one on each side to hold it down. If you are using an iron, you will need more. Sometimes the iron will cause the image to slip and you will get a ghost image. [Only use Artesprix Heat Tape on the outer edge of the design (not over it).]

Position your design on top of your blank and secure it with the heat tape.

Step 8.

Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 30 seconds.

Step 9.

Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. [Designer tip: Make sure that your design is facing the heat source before you heat press.] Place it inside the Heat Press and close the machine. The Heat Press will beep indicating that your project is finished!

Step 10.

While wearing protective gloves, lift the handle and take your sublimated Pet Bandana. Place the bandana on top of the Protective Project Mat and give it a few minutes to cool down. Gently remove the paper to reveal the design!

I had so much fun creating this D.I.Y Halloween Pet Bandana. The challenge for me now is to actually get my cat to wear it on Halloween!

Here’s a closer look:

I love the little ghost holding the candles and the lollipop! This design turned out to be cute and whimsical!

Join in the Iron-on-Ink Fun!

Love this D.I.Y Halloween Pet Bandanaproject? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron-on ink projects.

Don’t forget to save this to Pinterest and share with all your friends!

If you like this project, you need to check out Ivy Rivera’s Artesprix Flocked Sublimation T-shirt project.

You will find all the blanks and other supplies available for purchase on the Artespix website. They are also listed and linked below. Thank you for stopping by and happy crafting!

**The links below are affiliate links. If you decide to make a purchase, you are supporting today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

———-SUPPLIES———-