Kat Scrappiness Design Team

Spring Coffee Lovers Blog Hop – KatScrappiness Coffee and You

| marialrussell

coffee lovers blog hop logo_spring

It’s that time of the year again and I am so excited to be participating in the “Spring Coffee Lover’s Blog Hop”.  I’d like to take this opportunity to thank Amy Tsuruta and the rest of her team responsible for facilitating this great hop!  I don’t know how you guys do it but you all rock!

Today I made a card showcasing products from the #KatScrappiness shop (www.katscrappiness.com).    THERE IS A SPECIAL COUPON CODE at the shop during the duration of the hop only, so hurry and shop for all the crafty products you’ve all wanted to order from the shop (use coupon code: “SPRINGCOFFEE” for 15% off your order).

katscrapclbhpromo

I started out by stamping my bear image (Gerda Steiner Warm Fuzzies stamp set)  using my stamping tool with memento tuxedo black ink on Neenah Solar White card stock. I colored my image in with my Copic markers, then used my precision cut scissors to fuzzy-cut the image.

Using the largest of the Stitched Fancy Scalloped Rectangle dies, I die-cut my front panel with the Doodlebug Cream & Sugar 6 X 6 paper pad. I also created the half-circle window using a die from my stash.

To finish off my design, I die-cut the trees, stamped my sentiment on the banner, and adhered them all to the card. For my final touch, I used my new favorite, Crystal Nuvo Drops in Dandelion. Here is my card:

KatScrapCLBH1

For more details about the hop or if you would like to participate, please click on this link: http://www.coffeelovingcardmakers.com.

Thank you for stopping by and have an amazing day!

————-SUPPLIES———-

(Some affiliate links may have been used at no additional cost to you)

Llama Tell You Card & Planner Decorating

| marialrussell

I am back today to share with you my design team projects for KatScrappiness, showcasing the Gerda Steiner Llama Tell You stamp set and its coordinating dies, with Stitched Fancy Scalloped Dies, Double-Stitched Rectangle dies and a bunch of other supplies available now at the shop.

I am going to keep this blog post short as I have a process video for you today.  The supplies I have used are listed and linked below.  I hope you got inspired! Have an amazing day!

KatScrapLlama1

KatScrapLlama2

Here’s the process video:

——-SUPPLIES———

Happy Easter Card and Easter Treat Bag

| marialrussell

Hello stampers and crafters! It’s Maria Russell here with you today and I am so thrilled to be back as a design team member for Kat Scrappiness.

Today I have created two projects, showcasing the (recently stocked) Stitched Heart Tag Dies, Stitched Rope Nested Rectangle Dies, Gerda Steiner Brush Bunny stamp set and a bunch of other products available at the shop.

If you haven’t watched the YouTube video tutorial on how I made these treat boxes, I have linked the video below. It is very easy and you can create a decent-size treat bag using these tag dies. They are so versatile you can create a ton of projects with these dies, for any occasion.  Here is the video tutorial:

For the treat bag, I started out by die-cutting the tags twice and stamped my images on the tag. I highlighted the rainbow with my white gel pen. Before assembling the treat bag, I die-cut a grass border hills die. It is important to do this step first before assembling the bag.

IMG_4339

I stamped my bunny images on Neenah solar white card stock and colored him in with my Copic markers. I adhered my bunny to the treat bag.

Using my favorite Lawn Fawn Tiny Tag Saying stamp set and Tiny Tag Dies, I stamped the sentiment on the tag, and attached it on the treat bag with my pink and white twine. Hear is the treat bag:

IMG_4341
For the card, I started out by die-cutting my front panel using the largest of the stitched rope nested rectangle dies. I sponged the “clouds” using my lawn Fawn Clouds Border Dies, with Tim Holtz Broken China distress Ink.

IMG_4338

I die-cut another grass border die and adhered it on my front panel. I stamped the eggs on Neenah Solar White card stock and colored them in with my Copic markers. I also used my Sakura Gel pens to add some details to the eggs.

To finish off my design, I adhered all of the stamped images and die-cuts on the front panel of my card. Using a blue card base, I adhered the front panel to my card base using my all-time favorite Xyron Mega Tape Runner. Here is the card:

IMG_4342

Here are the two projects:

IMG_4340

I hope you got inspired today. Please check out all the new items at Kat Scrappiness online store before they sold out again. The supplies I have used are listed and linked below. Have an amazing day!

————-SUPPLIES———

Valentine’s Day Card

| marialrussell

Hello everyone! I’m back today to share with you a cute Valentine’s Card, showcasing products available at Kat Scrappiness, i.e. stamp sets by Lawn Fawn – Love Letters, Cheery Christmas and Mom & Me stamp sets, Stitched Fancy Scalloped Rectangle Dies, Inkadinkado masking paper and Gina Marie Designs ribbon bow dies. I apologize that I don’t have a process video today as I am currently traveling for a few days.

I wanted to create a very simple card with some masking technique.  I started out by die-cutting my watercolor card stock using the stitched fancy scalloped die. I stamped my two squirrels on Inkadinkado masking paper and fuzzy cut them with my precision scissors.

Using my stamping tool, I laid out my scene and stamped my squirrels twice with Versafine vintage sepia pigment ink.  I heat-set it with some clear embossing powder.  Using the mask I created, I covered the squirrels so I can stamp the wood stump on top of the squirrel. Removing the mask, I also set the tree stump with clear embossing powder.

I colored the images using my Zig clean color real brush markers.  I used my heating tool to dry them out a little, and covered the images with my mask.

I smudged some spun sugar and shaded lilac distress inks on a clear acrylic block, sprayed it with water, and used my flat watercolor brush to carefully start brushing the color onto the paper.  [Since the images are already covered with my masking paper, I was not afraid to do this technique.] I removed the mask and set it aside to dry.

I finished off the design by using a patterned paper by Crate Paper design, and die-cut a bow using a ribbon bow die by Gina Marie Designs.

Here is the final card:

img_3703

I hope you got inspired today. The supplies I have used are listed and linked below.  Thanks for stopping by and have an amazing day!

———SUPPLIES——–

D.I.Y. Treat Bag using Stitched Heart Tag Dies by KatScrappiness

| marialrussell

Hello stampers and crafters! I am back with you today to share with you a process video on how I made Valentine’s treat bags using the new stitched heart tag dies by Kat Scrappiness.

Instructions:

In order to make the bag, you will need two pieces of the stitched heart tag dies.

1. You will also need a matching piece of either card stock or patterned paper measuring 2 inches by 11 7/8. On the 11 7/8 side, score the paper at 4 inches, and 7 7/8 inches.

2. Flip the paper.

3. On the 2 inches side, score at 1/4 inch on both sides.

Here is the process video. All supplies are listed and linked below.

 

 

———–SUPPLIES———-

https://static.inlinkz.com/ppr.js

New Tag Dies at Kat Scrappiness Plus Project Share

| marialrussell

I have made some projects today showcasing the new Heart Stitched Tag Dies and Stitched Scalloped Nesting Dies available at the shop.

 

img_3567

img_3577

I have also shared them on my YouTube channel if you’d like to see the card and tags.  Supplies are listed and linked below:

 

 

————-SUPPLIES———–

https://static.inlinkz.com/ppr.js

Valentine’s Luminaries [or Treat Bags]

| marialrussell

 

 

img_3489

It’s Maria here with you again today to share some cute Valentine’s craft projects. I am showcasing the new adorable Snowman Die, Double-stiched Heart Dies and the Snowflake Kisses Script Dies from Kat Scrappiness.  There’s a ton of new products now.  Check out the Valentine’s section at the shop: https://www.katscrappiness.com/collections/valentines-day…

Here is the process video. Have a great week and happy decorating!

——–SUPPLIES————

https://static.inlinkz.com/ppr.js

You Octopi My Heart

| marialrussell

Hello crafters! It’s Maria Russell here with you again today to share with you a cute Valentine’s card, showcasing the Stitched Fancy Scalloped Rectangle Dies, Stitched Rectangle Dies, Lawn Fawn Octopi My Heart stamp set and dies, and a LOT of products available now at Kat Scrappiness.

 

I wanted to record a process video earlier to show you how I made this shaker card but I am still recovering from laryngitis and it was so hard for me to talk and craft at the same time. I apologize if I don’t have a process video for you today.

 

I started out by die-cutting my shaker panel using the new Stitched Fancy Scalloped Rectangle Dies, with the Stitched Rectangle dies. I also used my acetate sheet to adhere to the panel to create the window for my shaker card. I stamped my images on Neenah solar white card stock and colored my Octopi with my Copic markers. I also stamped the coral images from an older Lawn Fawn Mermaid For You stamp set. I die-cut the images using the coordinating dies.

 

img_3461

 

I wanted to color my card stock using the stitched wave border dies to create some waves, so I used the Inkadinkado Masking paper to cut out my mask. I used my distress inks to color the background. I splattered some water using my watercolor brush to create “bubbles”. Somehow it didn’t look like I had enough bubbles so I used my Copic White Opaque paint and splattered some white paint all over my background. This made it look more realistic!

img_3460 img_3459

 

 

 

 

 

 

 



I finished off the design of the card by using some beautiful sequin mixes from Kat Scrappiness for my shaker element. I used 6mm Metallic Grape, 6mm Sparkling Snow Sequin Mix, White Diamond Sequin Mix and some green seed beads I had from my stash.

 

Here is my card:

img_3458

I hope you got inspired today.  Thank you so much for stopping by.  Have an amazing day!

———–SUPPLIES——————–

https://static.inlinkz.com/ppr.js

Holiday Spirits Christmas Card

| marialrussell

Hello everyone! It’s Maria here with you today and I will be showcasing a lot of items from Kat Scrappiness. For my card, I have used the Avery Elle Holiday Spirits stamp set and Holiday Spirits Dies, with DCAM 8×8 Bricked Wall Stencil and Deck the Halls sequin Mix.

Here is the card:

img_2935

The process video below will not show any Copic coloring because I wanted to keep the video as short as possible. You will, however, see how I stenciled the background and assembled the card.

 

I hope you found the video helpful and got inspired today. The supplies I have used are listed and linked below. Happy holidays!

—–SUPPLIES—–